Track-It Extreme Temperature Loggers

The Track-It Extreme Temperature Data Loggers are battery powered stand alone data loggers that record up to 30,000 samples of temperature  data. The units are easily configured using the included Track-It™ Software. Simply plug the logger into the Extreme Logger Reader which connects via a standard USB cable to any open USB port on your PC and the Track-It™ Software automatically identifies the logger. The Logger communicates via the Extreme Logger Reader without opening the logger so long term integrity of the housing is ensured. The Track-It™ Extreme Temperature Logger housing is made of 316L Stainless Steel and meets IP68 rating standards.  Set the unit up to start or stop recording immediately, at a predetermined time and date, or only at certain temperature values.  The sample storage rate can be set from 1 sample every 2 seconds up to 1 sample every 24 hours. The on board data storage is non-volatile so data will not be lost in the event of a depleted battery.

Typical Uses

• Validation
• Medical Device Sterilization
• Steam Heat Sterilization
• Autoclave Sterilization
• Ovens/Chambers
• Refrigerators/Freezers
• HACCP Implementation
• Pasteurization
• Food and Beverage Processing
• Uniformity Mapping
• Pharmaceutical Processing
• Storage
  

  FEATURES

  • Up to 30,000 samples per record
  • Alarm set points allows graphical visualization of excursions
  • Compact size allows for easy placement in any application
  • 21 CFR Part 11 compliant software
  • 9 point N.I.S.T. certificate included
  • -58 to 302 deg. F (-50 to 150 deg. C) temp range
  • Extended range for probe tip: -70 to 300 deg. C
  • 0.1 deg. C accuracy and excellent repeatability
  • Accurate internal clock (1 minute/year)
  • MKT calculation over an entire data file or selected time intervals
  • Flexible and fixed probes
  • Simple setup and deployment
  • RTD technology provides superior accuracy over wide temperature rang